Irongrip

General: Wire rope clamp type, approved for lifting. Requires fewer clamps per fixation, e.g. two wire clamps instead of four, for 16 mm cable. Symmetrical – cannot be wrongly fitted. The clamps ensure fixation of the wire to a degree of at least 90% of the minimum breaking load of the wire in accordance with the current European standard.
Design: Bases of cast steel.

  • Finish: Hot dip galvanized.
  • Note: Follow the fitting instructions in the user manual before use. Not for use with compacted or hammered wire ropes.
bg_100_225mm
BG-100_sida
Select a row from the table below, then click the add to quote button
Part Code Code Thread Rope Ø min
mm
No. of clamps when lifting* Moment (Nm) Weight
kg/100pc
CAD
10.17BG0600 BG-600 M6 5-6 2 9,5 9
10.17BG0800 BG-800 M6 6.5-8 2 9,5 12
10.17BG1000 BG-1000 M8 8.5-10 2 22 20
10.17BG1200 BG-1200 M10 11-12,5 2 44 39
10.17BG1600 BG-1600 M12 13-16 2 75 72
10.17BG2000 BG-2000 M14 17-20 2 120 120
10.17BG2500 BG-2500 M18 21-25 2 260 280
10.17BG3400 BG-3400 M20 26-34 2 350 770

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download

Manuals