The aluminium ferrule UM (Ultragrip™) are made from a special designed profile. The UM ferrule corresponds to EN 13411-3, the European standard (FSET) and also the Japanese standard for turnback ferrule or ferrule secured eye termination. The ferrules are produced from seamfree extrucions which are extruded seamlessly over mandrel and the aluminium alloy is EN AW-5051A according to EN 573-3.

The UM ferrule can be used in basic applications, with bright or galvanized single layer steel wire ropes with round strands up to fill factor 0,60 and grade 1960. The types of rope lay shall be Ordinary or Lang lay. For fibre core wire ropes larger than 60 mm the maximum rope grade is 1770. Wire ropes shall conform to EN 12385-4 and 5.

The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960.

  • Material: Aluminum.
  • Marking: According to standard
  • Standard: EN 13411-3
    sizes: 1, 1.5, 2, 42, 46, 50, 54, and 58 are not included in the EN 13411-3
  • Note: Diameter and length is after pressing. Below you can find the manufacturer's product data sheet for guidance on dimension selection.
Select a row from the table below, then click the add to quote button
Part Code Diameter
Size Length
10.01UM09 16 9 36
Diameter is after pressing.
Length is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.


info / downloads