General: Coupling the fork lift jib to a forklift creates a virtual crane hoist with a reach that is both longer and higher, and capable of moving goods that would otherwise require the use of a mobile crane. It also makes it possible to pass over obstacles such as fencing for example.
Design: Telescopic sliding arm for lifting in positions 6-10. The arm can be raised in 15-degree steps, up to 45 degrees. It is equipped with a support wheel that can be raised and is also demountable. Supplied complete with shackle and swivel safety hook, as shown in the table. The fork lift jib is locked behind the fork ends by means of a through locking pin.
Proof: Batch proof 2 x WLL

  • Material: Hollow beam and plate of high-strength structural steel.
  • Marking: Maximum load and CE-markning.
  • Finish: Yellow painted.
  • Warning: To be able to use the full capacity of the fork lift jib according to the chart above there needs to be a lifting capacity of at least 5 tonnes at 600mm on the forks. If a smaller truck is to be used the chart needs to be equivalently reduced. The recalculation and remarking of the loading sign can be made on request.
truckarm_m_new[4]_225mm
Select a row from the table below, then click the add to quote button
Part Code Code hook type Max. load
ton
Fork dimension
mm
Shackle type Weight
kg
CAD
06.326913 6913 WSB/S-10-10 3 155x60 - 125x50 1,128 175
Other sizes and designs on request.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download
Lifting position
1
2
3
4
5
6
7
8
9
10
Gap to hook (L)
700
1000
1300
1600
1900
2300
2700
3100
3500
3700
Maximum load kg
3000
2500
2000
1750
1395
1075
875
735
640
600