Design: Jaw-jaw. Delievered complete with locking nuts.

Proof: Will be proof loaded when they are included in a lifting tool or on request.
 

  • Material: Stainless acidproof steel AISI 316.
  • Finish: Polished.
  • Note: On request the rigging screws can be provided with thread stop
  • Warning: The turnbuckles are normally not intended for lifting. If they are to be used for lifting every individual turnbuckle shall  be proof loaded, this is made on request. The turnbuckles are not allowed to be adjusted in length under load, when they are used for lifting!
Select a row from the table below, then click the add to quote button
Part Code MBL Thread A
mm
B
mm
L1
mm
L2
mm
Weight CAD
11.54120005 0.8 M5 7.5 12 188 126 0.05
11.54120006 1.25 M6 7.5 12 210 142 0.09
11.54120006X 1.25 M6 9.5 13 213 145 0.14
11.54120008 1.3 M8 9.5 13 251 170 0.15
11.54120008X 2.35 M8 11 15 258 178 0.15
11.54120010 2.35 M10 11 15 272 197 0.24
11.54120010X 3.5 M10 12 19 286 204 0.26
11.54120012 5.1 M12 14 25 359 251 0.53
11.54120014X 5.9 M14 18 32 413 295 0.64
11.54120016X 8 M16 18 33 479 319 1
11.54120020 13 M20 19 48 550 390 2
11.54120022 17 M22 30 57 653 472 4.3
11.54120024 20 M24 30 62 796 539 6.4
11.54120012X 5.1 M12 18 32 375 269
11.54120014 5.9 M14 14 25 400 280
11.54120016 8 M16 18 32 480 320
11.54120016L 8 M16 22 30 472 312
11.54120020L 13 M20 30 47 559 389
11.54120030 19 M30 35 76 907 647
11.54120027 25.5 M27 32 68 825 590
11.54120036 43 M36 40 86 990 715
Other performance on request.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download