JDT Theile

Advantages:                        

  • Compact design                        
  • Secured four times against breakage                        
  • D-link swings 180°                        
  • Weld-on shackle made of material S355JR according to EN 10025    
  • Material: Eye of alloy steel grade 8. Welding attatchment of steel St 52.
  • Marking: WLL.
  • Finish: Painted.
  • Note: The surface that the lifting eyes shall be attached to shall be flat and tolerate the load it is going to be exposed to.
  • Safety factor: 4:1.
  • Grade: 8
Select a row from the table below, then click the add to quote button
Part Code Code a
mm
b
mm
c
mm
ø d
mm
e
mm
f
mm
l
mm
Weight
kg
CAD
11.410381701000 TAPS 1 32 38 32 13 25 70 42 0,32 -
11.410381702000 TAPS 2 34 40 34 14 26 72 42 0,33 -
11.410381703000 TAPS 3 47 56 50 18 36 92 54 0,84 -
11.410381705000 TAPS 5 55 67 60 22 46 111 63 1,56 -
11.410381708000 TAPS 8 68 80 68 26 54 127 68 2,62 -
11.410380415000 TAPS 15 82 125 100 30 60 190 120 5,4 -
11.410380420000 TAPS 20 125 150 125 46 90 254 155 16 -
11.410380425000 TAPS 25 135 170 140 52 100 288 175 22,8 -
11.410380430000 TAPS 30 155 200 170 56 110 334 210 32,3 -
11.410380435000 TAPS 35 170 200 170 56 120 346 210 34,7 -
11.410380440000 TAPS 40 180 210 185 62 130 363 220 45,2 -
11.410380445000 TAPS 50 190 230 195 73 135 395 235 56,5 -
11.410380463000 TAPS 63 190 230 195 73 135 395 235 56,5 -

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

To download CAD files, you must provide a valid e-mail address

Fetching the CAD file...
kind of attachment  
 Load 1
 
 Load 6
 
 Load 2
 
 Load 5
 
Load 3 
 
Load 4 
number of piece 1 1 2 2 2 3 o. 4
inclination angle 90° 90° 0°-45° 45°-60° 0°-45° 45°-60°
Code  WLL ton
t t t t t t t t
TAPS 1 1,60 1,12 3,20 2,24 1,50 1,12 2,36 1,60
TAPS 2 3,00 2,00 6,00 4,00 2,80 2,00 4,00 3,00
TAPS 3 4,75 3,15 9,50 6,30 4,25 3,15 6,30 4,75
TAPS 5 8,00 5,30 16,00 10,60 7,10 5,30 11,20 8,00
TAPS 8 12,00 8,00 24,00 16,00 11,20 8,00 16,00 12,00
TAPS 15 22,40 15,00 45,00 30,00 21,20 15,00 31,50 22,40
TAPS 20 30,00 20,00 60,00 40,00 30,00 20,00 40,00 30,00
TAPS 25 37,50 25,00 75,00 50,00 33,50 25,00 50,00 37,50
TAPS 30 45,00 30,00 90,00 60,00 45,00 30,00 63,00 45,00
TAPS 35 50,00 35,00 100,00 70,00 47,50 35,00 70,00 50,00
TAPS 40 60,00 40,00 120,00 80,00 56,00 40,00 80,00 60,00
TAPS 50 71,00 50,00 142,00 100,00 70,00 50,00 100,00 71,00
TAPS 63 75,00 63,00 150,00 126,00 90,00 63,00 132,00 95,00