Components that are cracked, visibly distorted or twisted, severely corroded or have deposits that cannot be removed should be discarded and replaced.

Minor damage such as nicks and gouges to terminal fittings may be removed by careful grinding or filing. The surface should blend smoothly into adjacent material without abrupt change of section. The complete removal of the damage should not reduce the thickness of the section at that point to less than the manufacturer’s specified minimum dimensions or by more than 10% of nominal thickness of the section.

Product inquiry

Certex Finland Oy * Juvan teollisuuskatu 25 C * 02920 Espoo * Puh: 0201 550 220 *