Our technical support help you with everything from certifcates to manuals and advice about complicated lifting senarios.
Contact one of our sales offices for support.
WARNING! In case the clips half-parts tangent when tightening the screws, a minor Eureka wire rope clip shall be used.
Fasten half of the wire rope lock in a vice. Untie the bolts and pull the wire rope through the lock.
Form the eye and push the end of the wire rope back through the lock.
The end of the wire rope has to be entirely carried though the wire rope lock. The visible rope have the same length as the wire rope diameter. Fasten the bolts on the top.
Turn the lock.
Fasten the bolts. Check the tightening of the bolts on both the upper and the lower sides. Use extension for fastening.
Download CAD by choosing format in the menu below and the clicking on the icon left of the article number in the table below. The CAD plan will the load and after it reaches 100% you can klick on the blinking icon to download it. Please note that CAD drawings are only available if the icon left of the article number below is colored and not greyed out.
Certex Finland Oy * Juvan teollisuuskatu 25 C * 02920 Espoo * Puh: 0201 550 220 * firstname.lastname@example.org