Our technical support help you with everything from certifcates to manuals and advice about complicated lifting senarios.
Contact one of our sales offices for support.
Features: High Quality Lift Suspension Wedge SocketMaterial: Galvanised SteelMarking: Size and CE markSafety factor: 10:1Finish: Galvanised Standard: SS-EN 13411-7
Standard: EN 13411-7
When fitting the rope to the socket as much slack as possible should be removed from the system in order to maximise the available eye bolt adjustment. The load should then be applied to the assembly and the wedge observed to seat correctly in the socket body.A single DIN 1142 wire rope grip should then be fitted across the two parts of rope near to the socket body. This, along with the split pin fitted into the wedge, ensures that the wedge cannot become displaced in a slack rope condition.
Download CAD by choosing format in the menu below and the clicking on the icon left of the article number in the table below. The CAD plan will the load and after it reaches 100% you can klick on the blinking icon to download it. Please note that CAD drawings are only available if the icon left of the article number below is colored and not greyed out.
Certex Finland Oy * Juvan teollisuuskatu 25 C * 02920 Espoo * Puh: 0201 550 220 * firstname.lastname@example.org